Fast delivery
Sea&Air
GPM-2-300 Spectrum Grinding Machine
In the process of preparation of metallographic sample, pre grinding, polishing and grinding are the indispensable procedures, which are usually finished by the grinding and polishing machine. However, for some rough work pieces, they should be finished by some special machines. According to the different kinds of requirements of the customer, our company designs GPM-2-300 spectrum grinding machine, which has novel and beautiful appearance, and the whole frame adopts spray process. The machine is very easy to use and the abrasive paper is also convenient to be replaced. It saves time and avoids wasting. There is an internal dust collecting device, makes it safety and environmental protective. This machine starts steady and has large transmission power and low noise. This machine can be adapted to various materials preparation of test samples, improves the quality and efficiency of the grinding and polishing, which is the best equipment of metallographic sample preparation.
LMP-160 grinding and polishing machine
LMP-160 grinding and polishing machine
LMP-160E grinding and polishing machine
LMP-160E grinding and polishing machine
LMP-260E grinding and polishing machine
LMP-260E grinding and polishing machine
LMP-2B grinding and polishing machine
LMP-2B stepless speed regulating test grinding and polishing machine is a double disk desktop computer, which is suitable for pre-grinding, grinding and polishing metallographic samples. The machine can directly obtain a speed of 50-1000 RPM through frequency converter speed regulation, so that the machine can be more widely used. It is an important equipment for users to make metallographic samples.
LMP-2D grinding and polishing machine
LMP-2D grinding and polishing machine
LMP-2DE grinding and polishing machine
LMP-2DE grinding and polishing machine
LMP-2S grinding and polishing machine
LMP-2S grinding and polishing machine
LMP1000 grinding and polishing machine
LMP1000 grinding and polishing machine
LMP2000 grinding and polishing machine
LMP2000 grinding and polishing machine
MIC-4S automatic grinding polishing machine
MIC-4S automatic polishing machine using advanced sample preparation capabilities, so sample preparation results is with consistency and reproducibility. This machine adopts the advanced microprocessor control system, which control sample preparation process. Grinding disc support bidirectional rotation, speed within a predetermined range can be adjusted. Pneumatic single point loading, it can support up to grinding and polishing 6pcs specimen simultaneously, also suitable for the single specimen sample preparation pressure, time setting is intuitive and convenient. MIC-4S is applicable to rough grinding, fine grinding, coarse polishing and polishing process as well as it is ideal equipment for enterprises, scientific research institutions and colleges laboratory.
MIC-BG30 belt grinding machine
This machine is a new generation design,made according to international standard and advanced process technique. Grinding and polishing the specimens with belt.You can change the difficult belts easy and efficient.The machine can instead of those reprepared grinder and manual abrasive paper grinding.Each belt can finish operation in 1-2 minutes.It is economical with time, effort,and abrasive paper if grinding the spectroscopy specimens
MIC-BG32 belt grinding machine
This machine is a new generation design,made according to international standard and advanced process technique. Grinding and polishing the specimens with belt.You can change the difficult belts easy and efficient.The machine can instead of those reprepared grinder and manual abrasive paper grinding.Each belt can finish operation in 1-2 minutes.It is economical with time, effort,and abrasive paper if grinding the spectroscopy specimens
MIC-LBG32 belt grinding machine
This machine is of new generation design, made according to international standard and advanced process technique. Grinding and polishing the specimens with belt. You can change the different belts in easy and efficient way. The machine can replace those grinding wheel machine and pre-grinder. It adopts manual abrasive paper grinding and each belt can finish operation within 1-2 minutes. It is economical to save time, effort and abrasive paper if grinding the spectroscopy specimens.
Mopao 1000 Automatic Grinding Polishing Machine
Mopao 1000 Automatic Grinding Polishing Machine
Product Description
MoPao1000 automatic grinding/polishing machine is made according to international standard and internationally advanced technology. Featured by high accuracy, stable reliable performance, easy operation, wide processing range, automatic operation, etc., the machine is an ideal metallographic processing instrument.
MoPao 1000B automatic grinder polisher
MoPao 1000B automatic grinder polisher
Application
Mopao 1000B Model automatic grinding/polishing machine adopt international advanced manufacturing technology in accordance with international standards. This series adopts the advanced microprocessor control system, which makes grinding disc and grinding head speed step less adjustable, sample preparation pressure, time setting. Operation can only change grinding disc and sandpaper fabric, showing wider applicability. The machine has the following features such as optional grinding disc rotation, quick-change grinding disc, vertical preparation fixture, pneumatic single point loading.
MoPao 2 automatic grinding polishing machine
MoPao 2 and MoPao 2S model automatic grinding /polishing machine adopt international advanced manufacturing technology in accordance with international standards. This series adopts the advanced microprocessor control system, which makes grinding disc and grinding head speed stepless adjustable, sample preparation pressure, time setting. Operation can only change grinding disc and sandpaper fabric, showing more wide applicability. The machine has the following features such as optional grinding disc rotation, quick-change grinding disc, vertical preparation fixture, pneumatic single point loading. This machine has cooling device and abrasive scouring nozzle, equipped with beautiful and practical ABS shell, stainless steel standard parts, and it is never rust. This series is applicable to rough grinding, fine grinding, coarse polishing and polishing process as well as it is an ideal equipment for enterprises, scientific research institutions and colleges laboratory.
Mopao 200E250E Metallographic grinding polishing machine
This grinder polisher is double plate. It is suitable for pre grinding, grinding and polishing metallographic specimens. Since the machine is speed-adjusted by microprocessor, it can run at a revolution of 0 to 1000rpm/1400rpm, which favors the machine with wide applications. The machine is equipped with cooling system that can cool down the specimen during pre-grinding so as to prevent overheating and damage the metallographic structure. Featuring easy operation and reliable performance, it is an indispensable device for the factories, research institutions and college labs to prepare metallographic specimen.
MoPao 2S automatic grinding polishing machine
MoPao 2 and MoPao 2S model automatic grinding /polishing machine adopt international advanced manufacturing technology in accordance with international standards. This series adopts the advanced microprocessor control system, which makes grinding disc and grinding head speed stepless adjustable, sample preparation pressure, time setting. Operation can only change grinding disc and sandpaper fabric, showing more wide applicability. The machine has the following features such as optional grinding disc rotation, quick-change grinding disc, vertical preparation fixture, pneumatic single point loading. This machine has cooling device and abrasive scouring nozzle, equipped with beautiful and practical ABS shell, stainless steel standard parts, and it is never rust. This series is applicable to rough grinding, fine grinding, coarse polishing and polishing process as well as it is an ideal equipment for enterprises, scientific research institutions and colleges laboratory.
MoPao 3 automatic grinding polishing machine
Mopao 3 automatic polishing machine
Application
MoPao3S automatic polishing machine is one kind of double disc type machine,which is the new generationg of high precison, the sample preparation process of automated manufacturing using the international advanced technology according to international standards.This machine adopts the advanced microprocessor control system,which makes the grinding disc,grinding head speed atepless adjustable,sample preparation pressure,time setting.The machine is applied more widely with the function of low noise and aluminum base.The machine is applicable to rough grinding,fine grinding,coarse polishing and polishing process as well as it is an ideal equipment for enterprises,scientific research institutions and colleges laboratory.
MoPao 3S automatic grinding polishing machine
MoPao3S automatic polishing machine is one kind of double disc type machine,which is the new generationg of high precison, the sample preparation process of automated manufacturing using the international advanced technology according to international standards.This machine adopts the advanced microprocessor control system,which makes the grinding disc,grinding head speed atepless adjustable,sample preparation pressure,time setting.The machine is applied more widely with the function of low noise and aluminum base.The machine is applicable to rough grinding,fine grinding,coarse polishing and polishing process as well as it is an ideal equipment for enterprises,scientific research institutions and colleges laboratory.
MoPao1B Metallographic grinding polishing machine
MoPao1B Metallographic grinding polishing machine
Applications
This grinder polisher is of single plate. It is suitable for pre grinding, grinding and polishing metallographic specimens. Since the machine is speed-adjusted by microprocessor, it can run at a revolution of 0 to 1400rpm, which favors the machine with wide applications. The machine is equipped with cooling system that can cool down the specimen during pre-grinding so as to prevent overheating and damage the metallographic structure. Featuring easy operation and reliable performance, it is an indispensable device for the factories, research institutions and college labs to prepare metallographic specimen.
MoPao2000 automatic grinding polishing machine
MoPao2000 automatic grinding/polishing machine is a pneumatic grinding/polishing equipment with high accuracy, low power consumption and automatic test, made according to internationally advanced technology.
MoPao200250300 Metallographic grinding polishing machine
MoPao200250300 Metallographic grinding polishing machine
Applications
This grinder polisher is single plate. It is suitable for pre grinding, grinding and polishing metallographic specimens. Since the machine is speed-adjusted by microprocessor, it can run at a revolution of 0 to 600rpm/1000rpm/1400rpm,which favors the machine with wide applications. The machine is equipped with cooling system that can cool down the specimen during pre grinding so as to prevent overheating and damage the metallographic structure. Featuring easy operation and reliable performance, it is an indispensable device for the factories, research institutions and college labs to prepare metallographic specimen.
MoPao200DE250DE Metallographic grinding polishing machine
This grinder polisher is single plate. It is suitable for pre grinding, grinding and polishing metallographic specimens. Since the machine is speed-adjusted by microprocessor, it can run at a revolution of 0 to 1000rpm/1400rpm,which favors the machine with wide applications. The machine is equipped with cooling system that can cool down the specimen during pre grinding so as to prevent overheating and damage the metallographic structure. Featuring easy operation and reliable performance, it is an indispensable device for the factories, research institutions and college labs to prepare metallographic specimen
MoPao2B Metallographic grinding polishing machine
MoPao2B Metallographic grinding polishing machine
Applications
This grinder polisher is of double plate. It is suitable for pre grinding, grinding and polishing metallographic specimens. Since the machine is speed-adjusted by microprocessor, it can run at a revolution of 0 to 1400rpm, which favors the machine with wide applications. The machine is equipped with cooling system that can cool down the specimen during pre-grinding so as to prevent overheating and damage the metallographic structure. Featuring easy operation and reliable performance, it is an indispensable device for the factories, research institutions and college labs to prepare metallographic specimen
MP-1 Metallographic grinding polishing machine
MP-1 Metallographic grinding polishing machine
Applications
This grinder polisher is double plate. It is suitable for pre grinding, grinding and polishing metallographic specimens. The machine is equipped with cooling system that can cool down the specimen during pre-grinding so as to prevent overheating and damage the metallographic structure. Featuring easy operation and reliable performance, it is an indispensable device for the factories, research institutions and college labs to prepare metallographic specimen
MP-2W Metallographic grinding polishing machine
MP-2W Metallographic grinding polishing machine
Applications
This grinder polisher is double plate. It is suitable for pre grinding, grinding and polishing metallographic specimens. The machine is equipped with cooling system that can cool down the specimen during pre-grinding so as to prevent overheating and damage the metallographic structure. Featuring easy operation and reliable performance, it is an indispensable device for the factories, research institutions and college labs to prepare metallographic specimen
MPJ-1A METALLOGRAPHIC SPECIMEN GRINDING MACHINE
MPJ-1A METALLOGRAPHIC SPECIMEN GRINDING MACHINE
Features
Model MPJ-1A metallographic specimen grinding machine is used for the grinding of surface of spectral analysis sample and metal, ceramic, glass etc. The machine features compact structure, smooth rotation, low noise, convenient operation, high efficiency. It is suitable to be used in factories, scientific research institutes. It is the ideal specimen preparation machine to be used in the metallographic laboratories of factory and science research institutes.
MPJ-1A model grinding machine
MPJ-1A model grinding machine is mainly used for the surface of spectral analysis sample and metal,ceramic,glass and other devices such as polishing.The machine has compact structure,single wheel speed,grinding wheel with different grain size,hardness.This machine is a smooth rotation,low noise,convenient operation,high efficiency.It is suitable for factories,scientific research institution.
MPJ-25 Metallographic Sample Grinding Machine
MPJ-25 Metallographic Sample Grinding Machine
During the preparation of metallographic specimen, the surface of the cut specimen or the surface of the unprocessed specimen is rough and uneven. In order to improve the quality of the specimen preparation and the working efficiency, the cut section of the specimen may be first grinded on the grinding machine and then be pre-grinded and polished. MPJ-25 metallographic sample grinding machine is designed according to the various technicians and various requirements. As a bench machine, it is suitable for the water grinding, dry grinding and lap cutting, easy to operate and maintain with high safety and reliability. The sewage collection disc and cover are made of stainless steel, which is the excellent machine for metallographic sample preparation.
MPJ-35 Metallographic Sample Grinding Machine
MPJ-35 Metallographic Sample Grinding Machine
MPJ-35 metallographic sample grinding machine is used for the rough grinding of the surface of the cut specimen or the surface of the unprocessed specimen, which could improve the preparation quality and the working efficiency. The grinding process of the machine adopts the wet grinding, so it could greatly reduce the pollution of grits flying when grinding. The upper part of the machine is made of stainless steel materials, and it has many advantages such as novel and beautiful figure, durable, convenient operation, safety, reliable and easy maintenance, etc. Therefore it is the excellent machine for metallographic sample preparation.
MPT grinding and polishing head
MPT grinding and polishing head
MY-1 Spectrum of Abrasive Belt Grinding Machine
MY-1 Spectrum of Abrasive Belt Grinding Machine
Introduction:
In the metallographic sample preparation and spectral analysis application, the grinding is an essential and important procedure. MY-1 is made of fully enclosed stainless steel. There is a water tank below the abrasive belt which could take the dirt into the water. It can adjust the tightness of the abrasive belt, which is easy to operate and maintain, safe and reliable. Therefore it is the ideal equipment for the metallographic sample preparation.
MY-2A spectrum abrasive belt grinding machine
MY-1 Spectrum of Abrasive Belt Grinding Machine
Introduction:
In the metallographic sample preparation and spectral analysis application, the grinding is an essential and important procedure. MY-1 is made of fully enclosed stainless steel. There is a water tank below the abrasive b
Grinding is the necessary working procedure before spectral measurement in the preparation of spectrum specimen. MY-2A spectrum abrasive belt grinding machine is made of fully enclosed stainless steel. There is a vacuum cleaner below the abrasive belt, which could suck the dust into the bag so that there would not be dust in the air. It is the new product developed according to numerous market research, many service conditions and merits of different grinding machine. The operational principle: The motor drives the main rolling drum through the triangular belt. And then it drivers the slave drum by abrasive belt. The abrasive belt moves straightly. The sample can be grinded to satisfy the spectral measurement demand on the abrasive belt.
elt which could take the dirt into the water. It can adjust the tightness of the abrasive belt, which is easy to operate and maintain, safe and reliable. Therefore it is the ideal equipment for the metallographic sample preparation.
ZDD-1 Automatic Dropping Device
ZDD-1 Automatic Dropping Device
In the metallographic sample preparation, pre-grinding, polishing and grinding are the indispensable procedures. The suspension needs to drop in the process of grinding and polishing, so this dropping device is just designed for the automatic dropping of the suspension. This machine is controlled by single chip microcomputer, and it is output by a precise peristaltic pump. The touch panel displays and controls the input speed. The motor is the 24V DC brush motor, used for a long time, and can completely replace the artificial drops. It has reached the purpose of timing and uniform output of the suspension. The machine can adapt to the output of various suspensions and can be used for various grinding and polishing machines. Its easy operation, compact appearance and safety make it the best ancillary equipment for metallographic sample preparation.
