Fast delivery
Sea&Air
DZXQ-1 automatic multi head inlay machine
DZXQ-1 automatic multi head inlay machine
Inlay is a very important link in the preparation of metallographic samples, especially for some small samples that are not easy to handle, samples with irregular shape that need to protect the edges or samples that need to be polished automatically, the inlay of samples is an essential process. DZXQ-1 automatic multi head inlay machine is an advanced hydraulic water-cooled automatic sample inlay equipment. The inlay process is controlled by a single-chip microcomputer program. It realizes the one key operation of the inlay process, such as heating, pressurization, pressure maintaining, cooling, pressure relief, and so on. It does not need operators to be on duty. It automatically completes the sample inlay and has the sound and light alarm function.
LZXQ-2 automatic metallographic sample inlaying machine
For the analysis of metallographic and petrographic samples, mosaic is the first process of sample preparation, especially for some small samples that are not easy to handle, samples with irregular shapes, or samples that need to be automatically ground and polished, mosaic before sample preparation is an important process.
LZXQ-2S automatic mosaic machine
LZXQ-2S automatic metallographic sample inlaying machine is a process before sample inlaying and polishing. It is used to inlay tiny or irregular metallographic and petrographic samples that are not easy to handle. After inlaying, it is convenient to grind and polish the sample and to observe the structure of the material under the metallographic microscope. The machine can automatically heat and pressurize. After pressing and forming, the machine will automatically stop to relieve pressure, and then press the button to automatically press the sample to automatically come up, that is, the cargo. Note: it is mainly used for thermosetting materials (such as Dianyu powder and bakelite powder). The temperature has been adjusted and automatically.
LZXQ-3 mosaic machine
The automatic metallographic and petrographic sample inlaying machine is a process before sample inlaying and polishing. It inlays tiny or irregular metallographic and petrographic samples that are not easy to handle. After inlaying, it is convenient to grind and polish the sample and to observe the structure of the material under the metallographic microscope. The machine can automatically heat and pressurize. After pressing and forming, the machine will automatically stop to relieve pressure, and then press the button to automatically press the sample to automatically come up, that is, the cargo. Note: it is mainly used for thermosetting materials (such as Dianyu powder and bakelite powder). The temperature has been adjusted and automatically
LZXQ-5 mosaic machine
LZXQ-5 sample inlaying machine is used to inlay those samples with inappropriate shape or size to meet the subsequent sample preparation steps and obtain the required detection plane; Or to protect edges or prevent surface defects caused by the preparation process. In modern metallographic laboratory, the widely used semi-automatic or automatic grinding / polishing machine has specification requirements for sample size. In order to meet this requirement, the sample must be inlaid. Therefore, the inlay machine has become one of the important equipment in metallographic laboratory.
LZXQ-5Q mosaic machine
LZXQ-5Q intelligent automatic metallographic inlay (pneumatic) inlay machine is an advanced hydraulic pneumatic water-cooled automatic sample inlay equipment. The whole process of inlay is controlled by the program, which realizes the one key operation of the inlay process such as heating, pressurization, load maintaining, cooling, unloading and sampling, and automatically completes the sample inlay without the operator on duty. Suitable for thermal inlay of all materials (thermosetting and thermoplastic); Program controlled intelligent operation (temperature, time, cooling, etc.) and suitable sample preparation specifications can be selected according to the actual situation You can also choose the model of replaceable steel mold sleeve.
MIC-ZXQ-5 mounting machine for metallographic specimen
MIC-ZXQ-5 mounting machine for metallographic specimen
Description
This machine's optimized heating and cooling system makes the setting time extremely short. And all processes from heating, holding, holding, cooling and unloading are done automatically with one click.
MIC-ZXQ-5O mounting machine for metallographic specimen
Application
The sample inlaying machine can inlay improper samples in shape or size to meet the following sampling steps, to obtain required inspection surface, or to protect edges or surface defects caused in the course of sample preparation. In modern metallographic labs, semi-automatic or automatic grinding/polishing machines have a certain requirement in sample size, so the samples must be inlayed. The sample inlaying machine is an indispensable equipment in the metallographic labs.
The machine is an automatic metallographic sample inlaying machine with cooling function, applicable to thermal inlaying of all materials (thermoset and thermoplasticity). Set inlaying parameters such as heating temperature, heat holding time, acting force, etc., put sample and inlaying materials, close the gland, press down the button, and then the machine can inlay automatically without a watchman. The machines may change four kinds of dies at will according to various requirements of samples, and also can press two samples simultaneously.
MIC-ZXQ-5s mounting machine for metallographic specimen
MIC-ZXQ-5s mounting machine for metallographic specimen
Description
This machine's optimized heating and cooling system makes the setting time extremely short. And all processes from heating, holding, holding, cooling and unloading are done automatically with one click.
MO-1 Metallographic specimen mounting press
MIC-MO-1 Metallographic specimen mounting press is suitable for the thermo-hardening plastic pressing of the small metallographic specimen which is not idiomorphic or hard to take. After forming, it will be very easy to process the grinding, polishing of the specimen and it is also convenient to process measuring of metallographic structure under metallographic microscope. The machine may work stable under the following working condition:
The temperature of surrounding medium can not be less than 10 °C and more than 40 °C
The relative humidity of air should be no more than 85% (20 °C)
The voltage fluctuation should be no more than 15%
There should be no obvious vibration source around
There should be no current conducting dust, explosive and corrosive air.
MO-5 Metallographic specimen mounting press
MIC-MO-5 automatic metallographic specimen mounting press is a kind of full automatic mounting press, equipped with in-out water cooling system. It is suitable for the heat mounting (thermo hardening & thermoplastic) for all kinds of materials. After the parameters such as heating temperature, heat preserving time and applied force etc. are set up, put the specimen and mounting material into the machine, close the cover and press the start button, then the machine will finish the job automatically. It is not necessary for the operator to be on duty. According to different requirements of the material, there are four kinds of moulds that can be chosen to meet the demands at will. Also it is available to prepare two pieces of specimens at the same time, the capacity is doubled.
MO-6 Metallographic specimen mounting press
MIC-MO-6 is a new Touch screen type Automatic Metallographic specimen mounting press, all working procedures can be done automatically. After the parameters such as heating temperature, heat preserving time and applied force etc. are set up, put the specimen and mounting material into the machine, close the cover and press the start button, then the machine will finish the job automatically. It is not necessary for the operator to be on duty. According to different requirements of the material, there are four kinds of moulds that can be chosen to meet the demands at will. Also it is available to prepare two pieces of specimens at the same time, the capacity is doubled.
SXQ-2 Metallographic Sample Mounting Press
SXQ-2 Metallographic Sample Mounting Press
Introduction:
Mounting is a very important process of metallographic sample preparation, especially for some difficult holding tiny samples, irregularly shaped samples, and what needs for protecting edge or automatic grinding and polishing, mounting is an essential procedure before sample preparation.
SXQ-2 metallographic sample mounting press is improved on the basis of the classic model XQ-1. With long mould and high heating power, it has high efficiency. The mould cover adopts the rotating thread structure, which is convenient and safe to open the cover. The integrated control interface has real-time display of total mounting time and temperature and visualization of mounting state, which makes the operation more humane. With water cooling system, it makes sample preparation fast. It has stable and reliable performance and easy operation, which is the economic choice for sample mounting. (Only for thermosetting materials, such as Bakelite powder, Urea formaldehyde molding powder etc.)
VIM-1 Vacuum Mounting Press
VIM-1 Vacuum Mounting Press
The machine consists of a vacuum chamber, an indexing assembly, a fuselage assembly, a feed assembly, and a vacuum pump. This model can realize multi-sample setting, which can be quickly converted between each station to improve work efficiency.
VXQ-1 vacuum mosaic machine
Technical data
Operating pressure: 2.0 bar
Safety valve: 2.8 ~ 3.3bar
Connecting pipe: 3 ~ 10bar
Vessel size: maximum outer diameter: 277mm, total height: 300mm
WXQ-2B Automatic Mounting Press Machine
WXQ-2B Automatic Mounting Press Machine
Application
This machine is designed for purpose of the last process before polishing. It is setting up those small, difficult-to-hold or irregular specimens for metallographical test. It can facilitate polishing and watch properly the ideal material structure and measure the hardness of the material by hardness tester. The inserts for this machine are limited to thermosetting materials only .The punching temperature of different thermosetting materials can be adjusted depending upon the features of materials .
XQ-2B METALLOGRAPHIC SPECIMEN MOUNTING PRESS
MODEL XQ-2B METALLOGRAPHIC SPECIMEN MOUNTING PRESS
Model XQ-2B Metallographic specimen mounting press is suitable for the thermo-hardening plastic pressing of the small metallographic specimen which is not idiomorphic or hard to take. After forming, it will be very easy to process the grinding, polishing of the specimen and it is also convenient to process measuring of metallographic structure under metallographic microscope, or hardness testing. This machine adopts digital display temperature controller to control the temperature, and uses timer to control the sample preparing time. After sample preparation is finished, it will cut off power supply automatically. It is the ideal sample preparing equipment to be used in factories, researching institutes and college laboratories.
YZXQ-1 Automatic Metallographic Sample Mounting Press
YZXQ-1 Automatic Metallographic Sample Mounting Press
Automatic Metallographic Sample Mounting Press is used to mosaic small specimens, specimens in irregular shapes, or specimens which are not easy to take up-the preceding process before grinding and polishing metallographic or rock specimens. The mosaic operation serves to facilitate the grinding and polishing operations of the specimens and the routine observation of the composition of the material under the metallographic microscope. The machine is heated, and intensified with pressure automatically. After the formation of the specimen under pressure, it stops the operation and discharges the pressure also in an automatical way. With another press of the knob, the machine automatically turns up the specimen, which may be taken away. Note: It is only for the hot solid materials (such as urea-formaldehyde molding powder and bakelite powder) with the temperature automatically regulated and controlled.
YZXQ-1A Automatic Single Head Mounting Press
YZXQ-1A Automatic Single Head Mounting Press
Mounting is a very important process of metallographic sample preparation, especially for some difficult holding tiny samples, irregularly shaped samples, and what needs for protecting edge or automatic grinding and polishing, mounting is an essential procedure before sample preparation. YZXQ-1A is an advanced hydraulic water-cooling automatic sample mounting press. The mounting process is controlled by the program, which realizes the one-key operation of heating, loading, holding, cooling and unloading process.
YZXQ-2 Automatic Metallographic Sample Mounting Press
YZXQ-2 Automatic Metallographic Sample Mounting Press
Mounting is a very important process of metallographic sample preparation, especially for some difficult holding tiny samples, irregularly shaped samples, and what needs for protecting edge or automatic grinding and polishing, mounting is an essential procedure before sample preparation. YZXQ-2 is an advanced hydraulic water-cooling automatic sample mounting press. The mounting process is controlled by the program, which realizes the one-key operation of heating, loading, holding, cooling and unloading process. The sample mounting is automatically completed with sound and light alarm function, without the need of the operator on duty. The machine adopts hydraulic pump with higher pressure, which makes the sample more compact. Unique cold and heat separation design makes it more safe and stable. High-definition touch screen displays pressure and temperature in real time. The water cooling system makes sample preparation fast and the special rotary locking design makes operation more convenient. With stable and reliable performance, it is the ideal equipment for sample mounting.
YZXQ-2A automatic single head mounting press
YZXQ-2A automatic single head mounting press
Inlaying is a very important process of metallographic sample preparation, especially for some difficult holding tiny samples, irregularly shaped samples, or what needs for protecting edge and automatic grinding and polishing, inlaying is an essential procedure before sample preparation.
YZXQ-3 automatic single head mounting press
YZXQ-3 automatic single head mounting press
Inlaying is a very important process of metallographic sample preparation, especially for some difficult holding tiny samples, irregularly shaped samples, or what needs for protecting edge and automatic grinding and polishing, inlaying is an essential procedure before sample preparation.
ZXQ-1 Automatic Metallographic Sample Mounting Press
ZXQ-1 Automatic Metallographic Sample Mounting Press
Mounting is a very important process of metallographic sample preparation, especially for some difficult holding tiny samples, irregularly shaped samples, and what needs for protecting edge or automatic grinding and polishing, mounting is an essential procedure before sample preparation. ZXQ-1 automatic metallographic sample mounting press adopts automatic mechanical pressure. The mounting process is controlled by the program, which realizes the one-key operation of heating, loading, holding, cooling and unloading process. The sample mounting is automatically completed with sound and light alarm function, without the need of the operator on duty. The machine adopts gear motor with stable pressure, and the water cooling system makes sample preparation fast. With stable and reliable performance, it is the ideal equipment for sample mounting.
ZXQ-2O Automatic Mounting Press Machine
ZXQ-2O is suitable for tiny or irregular metallorgraphic, lithofacies specimen to be mounted so that the sample will be cut or grinded and polished, and then metallography, spectral measurement or hardness testing. This, machine adopts 7’’big LCD screen display, which has the function of real-time temperature, holding time, cooling temperature. The complete process which is heating, constant pressure, cooling and sample preparation is controlled bu the CPU. The equipment can automatically press, heat and set the temperature condition in a minute. It is easy for us to operate the equipment with the stop button. After the sample preparation, the equipment may show prompt alarm and automatic pressure relief, automatic cooling, which can achieve the idea effect. It is one necessary equipment in laboratory of colleges, research institutes and factories.
