显示 1-36 个结果（共 65 个结果）

Show sidebar
Show 9 24 36
Close

2.7 Inch Portable Digital Microscope

2.7 Inch 544X Magnification 5MP Portable Digital Microscope 3.0 Mega Pixels (2048 X 1536) 5.0 Mega Pixels (2560 X 1920) Hardware Zoom: 17X magnification Smart Zoom TM: 8X (Applying) for magnifier mode Digital Zoom: 1.0X ~32X Total Enlarge image to 544X (17X32=544X)  
阅读更多
Quick view
Close

98JB Precision measuring projector (digital display type)

98JB Precision measuring projector (digital display type) Precision measuring projector (digital display type) 98JB main advantages are: structural stability, the use of telecentric optical path, using fiber-optic lighting makes more evenly bright, and can be measured in different parts of the brightness adjustment to eliminate the focusing error caused by measurement error. Convenient for operation and maintenance of aircraft, high efficiency and applicability. At present, projector 98JB precision measurement standards has been widely used measures, clocks and watches, synthetic textiles, precious stones bearings, instrument components and many other needs of the industry measurement of micro-projector.
阅读更多
Quick view
Close

9J Light-section microscope

9J Light-section microscope              Digital Photography Light-section Microscope 9J-V Use： The apparatus is based on measurement of light-section method of micro-machining the surface roughness. For surface scratches, groove or the depth of defects can also be used to carry out measurements. Characterized by light-section method without damaging the surface under the condition. Is a kind of indirect measurement method. That is, to go through can only be determined after calculating the trace of the roughness profile. The apparatus with a digital camera that is upgraded to digital photography Microscope light-section method. Specification： Uneven depth measurement range: 0.8～80μm（▽3～▽9） Uneven width    Eyepiece with micrometer     0.7μm～2.5mm Table with the coordinate   0.01～13mm Total magnifcation  60×/120×/260×/510× Net Weight: 23kg Dimension: 180×290×470mm
阅读更多
Quick view
Close

Abbe Refractometer

Abbe Refractometer Measurement of transparent and translucent liquids or solids and the average of the refractive index ND dispersion NF-NC. Equipment can also be received with thermostat, to determination of the temperature 0 ℃ -70 ℃ for the refractive index of ND, and measured the volume of sugar solution concentration in percentage of sugar content.
阅读更多
Quick view
Close

BJ portable metallurgical microscope

MIC TECH BJ-A/BJ-B model is a portable metallurgical microscope, but a little bit different. When metal and alloy which needs to be distinguished but unable to make samples to be used in the on-the-spot material is appraised live, this machine can carry on analysis and research on the metal material in the metallographic testing, and the analytic work of metallographic. It can also be applied to jade article, pottery, bronze ware surface observation of institutional framework analysis. This instrument adopts LED to light vertically, does not need 220V alternating current source, uses lightly and safely for users, hours continuously lighting, long service time. The LED light rises warmly. Very small in size, low heat for safe use. This instrument can dispose CCD digital camera, digital camera, but convenient picture gathered, kept, imported at the scene is analyzed and researched.
阅读更多
Quick view
Close

ICM-1000M tool microscope manual

Tool microscope for inspections ■ The stable and reliable operating mechanism provide clearer image and easier to operate. ■ Modulate microscope body with a new ergonomic design, structural symmetry, can used with many kinds of accessories. ■ Stage, light intensity and low position coarse and fine adjustment, increased comfort of operating. ■ Widely used in various types of semi-conductor silicon wafer inspection, materials science study, geology mineral analysis and precision engineering and other disciplines
阅读更多
Quick view
Close

Interference Microscope 6JA

Interference Microscope 6JA     Use: This instrument is used to measure the workpiece surface finish, or coating of groove depth. With accessories, but also granular measurement, patterns of chaos and low-reflectivity surface, while the apparatus placed in the workpiece, the surface of the large-scale measurements. Specifications: Uneven depth measurement range: 0.03-1μm（▽10～▽14） Work objective lens numerical aperture:  0.65 Work distance: 0.5mm Field of view:  Visual Φ0.25mm   Photo  0.21×0.15mm Magnifications: Visual  500×     Photo   168× Micrometer drum reticle value:  0.01mm
阅读更多
Quick view
Close

JC-10 JC4-10 Reading Microscope

JC-10 JC4-10 Reading Microscope  Portable measuring reading microscope simple structure, easy to use, can be determined distance, groove width and groove distance, keyway width slit dents, the workpiece width, length, surface quality of metal, fiber, fabric density, such as field samples. The apparatus is particularly suitable for measuring Brinell, Rockwell and Vickers hardness test indentation size.
阅读更多
Quick view
Close

JTC300 Digital Projector

JTC300 Digital Projector JTC300 digital projector is a kind of optical measure instrument to measure geometrical elements of tested object in the method of coordinate measuring and figure comparative measuring. It is direct, precise and effective. By the way of transmission and reflection illuminating, it can measure length, angle, figuration and surface of tested parts, especially suitable for examining small or composite parts, such as horologe component, templet, die, knife, etc. Projector is one of common-use instruments in factory, mine, enterprise, measure room, senior academy, and science research. It is equipped with data output interface to contact to computer to carry on corresponding planar measuring program, further convenient to calculate measured data and enlarging use range.
阅读更多
Quick view
Close

MIC 105J Digital measuring microscope

105J Digital measuring microscope Digital measuring microscope 105J is a large measurement precession microscope. The instrument used grating displacement sensor system for a high-efficiency optical measurement apparatus, with readings intuitive, simple, and to improve the efficiency of equipment and the use of granite for the base so that the stability of better equipment and so on. It is widely used in measuring the various enterprises; all levels of testing and calibration laboratories, as well as other sectors such as scientific research work in the measuring.
阅读更多
Quick view
Close

MIC 107J serials Precise measuring microscope

107J serials Precise measuring microscope 107JA Mitutoyo Micro-measuring handle wheel     107JC digital measuring system 107JPC Two-dimensional data measurement system Mimi-type and multi-use precise measuring microscope has the advantages of compact structure, clear imaging and high precision, used to precisely measure planar coordinate and assistant measure Z-direction. This instrument is equipped with ray-adjustable falling reflection, transformation, assistant illumination installation and multi filters, which brings great convenience to measure each kind of complex shape. It may contact to CCD Video-cam, also may contact to computer to carry on data processing.
阅读更多
Quick view
Close

MIC TECH toolmaker’s 2-D software

  1. Measurement of the roundness between circular and arc;
  2. Measurement of linearity;
  3. Measurement of axiality
  4. Measurement of symmetry
  5. Measurement of location
阅读更多
Quick view
Close

MIC-10BT tool microscope

MIC TECH’S new digital measurement microscope. Mainly used in manufacturing department, Measuring and testing room for components dimension test.LED illumination, calculator with two axises or three axises, full accessory for you to choose. Offer sub-micron precision test, excellent performance is best choice for your high quality components, integrated circuit three dimensional test. Even fresh man can operate this microscope very easily.
阅读更多
Quick view
Close

MIC-19JA5 Universal tool microscope graduator

19JA5 Universal tool microscope graduator Use: Optical graduator is the same with 19JA, 19JC universal tool microscope, used for polar coordinates and angle measurements. Measurement range and division:
  1. Measurement range 360°
  2. Projection value at reading 10”
  3. Diameter glass table 106mm
Measurement tolerance ≤20”
阅读更多
Quick view
Close

MIC-19JC Universal Tool Microscope

 19JC Universal Tool Microscope Classify type of measuring instrument universal tool microscope 19JC nearly contains all measures of testing geometry. With complete function, high precision, convenient operation and durability, this instrument is normal equipment in precise machinery field, effective testing gist for measure & examination dept., and right hand of science research and teaching field. Adopting grating subdivision and digital technology, 19JC has the characters of direct reading and good consistency, which greatly improves work efficiency and further enlarge use range. Digital-display device of this instrument has data output interface, which may be extended to contact with planar data gather and computer measure operating system to upgrade as 19JPC microcomputer-type all-purpose tool microscope. Universal Tool Microscope (Digital display type) 19JC is projection of the 19JA million workers improved significantly, the use of sub-gratings and digital technology, intuitive readings and consistency with good characteristics such as increased efficiency, to further expand the scope of the use. Instrument Digital Interface data output table can be extended to connect two-dimensional data acquisition system and computer measurement of the operating system to upgrade its computer-based universal tool microscope 19JPC.
阅读更多
Quick view
Close

MIC-19JPC micro computer universal tool microscope

19JPC micro computer universal tool microscope 19JPC micro-computer type all-purpose tool microcomputer is a new generation of all-purpose tool microcomputer used in computer assistant measure, which can solve each kind of complicated planar measuring problem. Traditional all-purpose tool microscope can not directly measure geometrical element in field of view, such as center of circle, midpoint, point of intersection, midline, and their distance, included angle and so on are hard to measure. But these are easy to do in 19JPC. This instrument adopts precise grating sensor, PC series and data interface gather to measure data, carry on data processing with 19JPC planar measuring program, display and print result. It is convenient to operate, only keying measuring command according to graphic menu displayed on screen. During the course of measuring, color display can timely display the coordination of collimated work piece. Rectangular coordinate or polar coordinate may convert at any movement, which is especially convenient for measuring polar coordinate and cam. This instrument adopts metric system and British system. Calculating precision may reach 0.0001mm and 0.00001inch.It may self-correct assemble error of worktable track, further improving measuring precision.
阅读更多
Quick view
Close

MIC-19JPC-V Universal Tool Microscope(Image)

19JPC-V Universal Tool Microscope(Image) 19LPC-V image-type all-purpose tool microscope is a new added image measuring system on the base of preserving all-purpose tool microscope performance. This system uses vision and special-purpose optical objective to substitute human’s eye to collimate and save video graph. Adopting electronic magnifier its zoom multiple is greatly improved and it is convenient to observe small work piece and precisely measure. Depending on high-precision track of all-purpose tool microscope, this system may realize high-precision image measuring in real meaning.
阅读更多
Quick view
Close

MIC-20A tool microscope

MIC TECH’S new digital measurement microscope. Mainly used in manufacturing department, Measuring and testing room for components dimension test.LED illumination, calculator with two axises or three axises, full accessory for you to choose. Offer sub-micron precision test, excellent performance is best choice for your high quality components, integrated circuit three dimensional test. Even fresh man can operate this microscope very easily.
阅读更多
Quick view
Close

MIC-20B tool microscope

MIC TECH’S new digital measurement microscope. Mainly used in manufacturing department, Measuring and testing room for components dimension test.LED illumination, calculator with two axises or three axises, full accessory for you to choose. Offer sub-micron precision test, excellent performance is best choice for your high quality components, integrated circuit three dimensional test. Even fresh man can operate this microscope very easily.
阅读更多
Quick view
Close

MIC-20BT tool microscope

MIC TECH’S MIC-20BT new digital measurement microscope. Mainly used in manufacturing department, Measuring and testing room for components dimension test.LED illumination, calculator with two axises or three axises, full accessory for you to choose. Offer sub-micron precision test, excellent performance is best choice for your high quality components, integrated circuit three dimensional test. Even fresh man can operate this microscope very easily.
阅读更多
Quick view
Close

MIC-20UF tool microscope

MIC TECH’S MIC-20UF new digital measurement microscope. Mainly used in manufacturing department, Measuring and testing room for components dimension test.LED illumination, calculator with two axises or three axises, full accessory for you to choose. Offer sub-micron precision test, excellent performance is best choice for your high quality components, integrated circuit three dimensional test. Even fresh man can operate this microscope very easily.
阅读更多
Quick view
Close

MIC-600 Multi-functional precision measuring microscope

MIC-600 Multi-functional precision measuring microscope is developed and aimed at the semiconductor industry,Silicon wafer manufacturing industry,electronic information industry,metallurgical industry.As an advanced precision measuring microscope,it can be used to identify,analyze and measure structure of a variety of metal,alloy and also for detecting the semiconductor,LCD,TFT,PDP and solar cell panel. The ergonomics design makes you feel comfortable.
阅读更多
Quick view
Close

MIC-6A tool microscope

MIC TECH’S MIC-6A is new digital measurement microscope. Mainly used in manufacturing department, Measuring and testing room for components dimension test.LED illumination, calculator with two axises or three axises, full accessory for you to choose. Offer sub-micron precision test, excellent performance is best choice for your high quality components, integrated circuit three dimensional test. Even fresh man can operate this microscope very easily.
阅读更多
Quick view
Close

MIC-6B tool microscope

MIC TECH’S MIC-6B is new digital measurement microscope. Mainly used in manufacturing department, Measuring and testing room for components dimension test.LED illumination, calculator with two axises or three axises, full accessory for you to choose. Offer sub-micron precision test, excellent performance is best choice for your high quality components, integrated circuit three dimensional test. Even fresh man can operate this microscope very easily.
阅读更多
Quick view
Close

MIC-6UF tool microscope

MIC TECH’S MIC-6U/F is new digital measurement microscope. Mainly used in manufacturing department, Measuring and testing room for components dimension test.LED illumination, calculator with two axises or three axises, full accessory for you to choose. Offer sub-micron precision test, excellent performance is best choice for your high quality components, integrated circuit three dimensional test. Even fresh man can operate this microscope very easily.
阅读更多
Quick view
Close

MIC-7ISP2000X 12MP 7inch IPS Screen Scanning Electronic Video Camera LCD Digital Microscope

MIC-7ISP 2000X 12MP 7inch IPS Screen Scanning Electronic Video Camera LCD Digital Microscope This electron microscope that can be widely used in biological research, antique appreciation, jewelry inspection, electronic component amplification, and coin identification, It support image, video and file storage.
阅读更多
Quick view
Close

MIC-AS12M HDMI camera microscope

MIC TECH AS12 8K 5G WIFI+HDMI+USB+Ethernet Digital Camera, 12.0M, C-Mount, USB/WIFI Measuring Advantages --8K 5G WIFI+HDMI+USB+Ethernet 12.0M High Speed 30Fps Digital Camera --1/2.3" High Quality CMOS Sensor Excellent Color Restoration --5G WIFI & USB 2.0 Data Output Support Computer Win7, Win10, Mac --Perfectly Compatible With Three Main Systems of Windows, iOS And Android. --Professional Analysis Software Support Measuring, Image Stitching, Field Of View Extend Full Range Output Ways To View High Quality Microscope Images Perfectly Compatible With 3 Main Systems: Windows, iOS and Android. 8K @30Fps Resolution Output To Computer through 5G WIFI or USB 2.0 Directly. 4K @30Fps Resolution Output To Monitor, TV, or Projector Through HDMI Port Mobile Phone or Tablet Can Scan The QR Code To Get Shared Live Image Through 5G WIFI WAN Connect To Router To Support PC or Smart Device Within The Same LAN Viewing Microscope Through Network. Wide Spectral Response Range Specially Designed For Fluorescent Image, Dark Field Image From Microscope
阅读更多
Quick view
Close

MIC-DM tool microscope

MIC TECH’S MIC-DM is new digital measurement microscope. Mainly used in manufacturing department, Measuring and testing room for components dimension test.LED illumination, calculator with two axis or three axis, full accessory for you to choose. Offer sub-micron precision test, excellent performance is best choice for your high quality components, integrated circuit three dimensional test. Even fresh man can operate this microscope very easily. Manual stage with high-resolution linear encoder makes fast and accurate measurement zoom ratio 7:1 high quality lens high resolution camera share and clear image transmitting, oblique illumination, and coaxial illumination
阅读更多
Quick view
Close

MIC-FEM8000F field emission scanning electron microscope

MIC-FEM8000F field emission scanning electron microscope Schottky Schottky field emission electron gun of high brightness, good single color,small electron beam spot size, long life Low acceleration voltage to maintain good brightness and higher resolution High beam stability, the dispersion is small, suitable for a variety of long accurate analysis, such as BSE, EDS, EBSD Low acceleration voltage of non-conductive samples can be directly observed without spraying Variety of automatic functions, operation is very simple, using only the mouse to complete all of the electron microscope operation
阅读更多
Quick view
Close

MIC-FEM8100F field emission scanning electron microscope

Advantage and Cases Scanning electron microscopy (sem) is suitable for the observation of the surface topography of metals, ceramics, semiconductors, minerals, biology, polymers, composites and nano-scale one-dimensional, two-dimensional and three-dimensional materials (secondary electron image, backscattered electron image).It can be used to analyze the point, line and surface components of microregion.It is widely used in petroleum, geology, mineral field, electronics, semiconductor field, medicine, biology field, chemical industry, polymer material field, criminal investigation of public security, agriculture, forestry and other fields.
阅读更多
Quick view
Close

MIC-HL tool microscope

More accurate step measurement no Segment difference sharp and excellent surface checking Good illumination which can be applied to different working environment Deep and large field of view Color CCD camera Digital image storage
阅读更多
Quick view
Close

MIC-JB precision measuring microscope

MIC-JB precision measuring microscope is a small size Two-dimensional measuring instrument with digital display,it is compact structure,imaging clearly and high precision.It adopts reflected and transmitted illumination,observe,analyze and measure the geometric sense of precision work piece through observation and digital display system.The microscope is wildly used in measuring room,produce line and department of research institutions,etc.Two-dimensional measuring software is available for your selection,for some geometric parameters which is difficult to measure directly,such as circle,arc,coaxial,parallel,crossing,relation of shape & position and virtual dimension,etc,it can get the result and output report automatically and quickly.
阅读更多
Quick view
Close

MIC-JD18 projecting universal length measuring machine

MIC-JD18 projecting universal length measuring machine Characteristics:
  1. The wax-screen technique is adopted for the projection screen, clear in imaging and homogeneous in brightness of the field
  2. High quality cast iron through long-term aging treatment is adopted for the base frame, strong in rigidity and good in stability.
  3. The double and single wire reading system is adopted, precise in pointing and accurate in measurement
  4. The worktable can move, rotate and out-beat in every direction, convenient for the detection of parts in different forms
  5. This instrument equipped with multiple accessories of tailstock, measuring hooks and caps, etc, large range in measurement.
阅读更多
Quick view
Close

MIC-JD20 precision optimeter

MIC-JD20 0.2μm precision optimeter Characteristics:
  1. New screen technology, attaching reading magnifier with uniform field brightness and clear image
  2. Hight measuring accuracy, stable and reliable data, convenient and fast measurement for precision parts with small dimension.
  3. Well structure design, small overall dimension, convenient for transportation
阅读更多
Quick view
Close

MIC-JD22A digital vertical length measuring machine

MIC-JD22A digital vertical length measuring machine Characteristics:
  1. Advanced raster sensor is adopted and measuring data are displayed digitally
  2. Main measuring shaft is square in design, with satisfactory running linearity and stable performance
  3. The design accord with Abbe’s theorem, with higher measuring precision and without Abbe error
  4. Main shaft running can be measured automatically or manually, convenient for the measurement of batch workpieces with higher working efficiency
阅读更多
Quick view
Close

MIC-JD25C-25D data processing universal length measurer

MIC-JD25C-25D data processing universal length measurer SPECIFICATION Main Measure Work-pieces Include: Smooth columniform worpieces (Axis, hole, plug gauge and ring gauge etc ) The mid-diameter of internal thread, external thread, thread plug gauge and thread ring gauge Workpieces with parallel plane (calipers, length bar and low-grade measuring block)
阅读更多
Quick view