Fast delivery
Sea&Air
2.7 Inch Portable Digital Microscope
2.7 Inch 544X Magnification 5MP Portable Digital Microscope
3.0 Mega Pixels (2048 X 1536)
5.0 Mega Pixels (2560 X 1920)
Hardware Zoom: 17X magnification
Smart Zoom TM: 8X (Applying) for magnifier mode
Digital Zoom: 1.0X ~32X
Total Enlarge image to 544X (17X32=544X)
98JB Precision measuring projector (digital display type)
98JB Precision measuring projector (digital display type)
Precision measuring projector (digital display type) 98JB main advantages are: structural stability, the use of telecentric optical path, using fiber-optic lighting makes more evenly bright, and can be measured in different parts of the brightness adjustment to eliminate the focusing error caused by measurement error. Convenient for operation and maintenance of aircraft, high efficiency and applicability.
At present, projector 98JB precision measurement standards has been widely used measures, clocks and watches, synthetic textiles, precious stones bearings, instrument components and many other needs of the industry measurement of micro-projector.
9J Light-section microscope
9J Light-section microscope
Digital Photography Light-section Microscope 9J-V
Use：
The apparatus is based on measurement of light-section method of micro-machining the surface roughness. For surface scratches, groove or the depth of defects can also be used to carry out measurements. Characterized by light-section method without damaging the surface under the condition. Is a kind of indirect measurement method. That is, to go through can only be determined after calculating the trace of the roughness profile. The apparatus with a digital camera that is upgraded to digital photography Microscope light-section method.
Specification：
Uneven depth measurement range: 0.8～80μm（▽3～▽9）
Uneven width Eyepiece with micrometer 0.7μm～2.5mm
Table with the coordinate 0.01～13mm
Total magnifcation 60×/120×/260×/510×
Net Weight: 23kg
Dimension: 180×290×470mm
Abbe Refractometer
Abbe Refractometer
Measurement of transparent and translucent liquids or solids and the average of the refractive index ND dispersion NF-NC. Equipment can also be received with thermostat, to determination of the temperature 0 ℃ -70 ℃ for the refractive index of ND, and measured the volume of sugar solution concentration in percentage of sugar content.
BJ portable metallurgical microscope
MIC TECH BJ-A/BJ-B model is a portable metallurgical microscope, but a little bit different. When metal and alloy which needs to be distinguished but unable to make samples to be used in the on-the-spot material is appraised live, this machine can carry on analysis and research on the metal material in the metallographic testing, and the analytic work of metallographic. It can also be applied to jade article, pottery, bronze ware surface observation of institutional framework analysis. This instrument adopts LED to light vertically, does not need 220V alternating current source, uses lightly and safely for users, hours continuously lighting, long service time. The LED light rises warmly. Very small in size, low heat for safe use.
This instrument can dispose CCD digital camera, digital camera, but convenient picture gathered, kept, imported at the scene is analyzed and researched.
Interference Microscope 6JA
Interference Microscope 6JA
Use:
This instrument is used to measure the workpiece surface finish, or coating of groove depth. With accessories, but also granular measurement, patterns of chaos and low-reflectivity surface, while the apparatus placed in the workpiece, the surface of the large-scale measurements.
Specifications:
Uneven depth measurement range: 0.03-1μm（▽10～▽14）
Work objective lens numerical aperture: 0.65
Work distance: 0.5mm
Field of view: Visual Φ0.25mm Photo 0.21×0.15mm
Magnifications: Visual 500× Photo 168×
Micrometer drum reticle value: 0.01mm
JC-10 JC4-10 Reading Microscope
JC-10 JC4-10 Reading Microscope
Portable measuring reading microscope simple structure, easy to use, can be determined distance, groove width and groove distance, keyway width slit dents, the workpiece width, length, surface quality of metal, fiber, fabric density, such as field samples.
The apparatus is particularly suitable for measuring Brinell, Rockwell and Vickers hardness test indentation size.
JTC300 Digital Projector
JTC300 Digital Projector
JTC300 digital projector is a kind of optical measure instrument to measure geometrical elements of tested object in the method of coordinate measuring and figure comparative measuring. It is direct, precise and effective. By the way of transmission and reflection illuminating, it can measure length, angle, figuration and surface of tested parts, especially suitable for examining small or composite parts, such as horologe component, templet, die, knife, etc. Projector is one of common-use instruments in factory, mine, enterprise, measure room, senior academy, and science research. It is equipped with data output interface to contact to computer to carry on corresponding planar measuring program, further convenient to calculate measured data and enlarging use range.
MIC 105J Digital measuring microscope
105J Digital measuring microscope
Digital measuring microscope 105J is a large measurement precession microscope. The instrument used grating displacement sensor system for a high-efficiency optical measurement apparatus, with readings intuitive, simple, and to improve the efficiency of equipment and the use of granite for the base so that the stability of better equipment and so on. It is widely used in measuring the various enterprises; all levels of testing and calibration laboratories, as well as other sectors such as scientific research work in the measuring.
MIC 107J serials Precise measuring microscope
107J serials Precise measuring microscope
107JA Mitutoyo Micro-measuring handle wheel
107JC digital measuring system
107JPC Two-dimensional data measurement system
Mimi-type and multi-use precise measuring microscope has the advantages of compact structure, clear imaging and high precision, used to precisely measure planar coordinate and assistant measure Z-direction. This instrument is equipped with ray-adjustable falling reflection, transformation, assistant illumination installation and multi filters, which brings great convenience to measure each kind of complex shape. It may contact to CCD Video-cam, also may contact to computer to carry on data processing.
MIC TECH toolmaker’s 2-D software
- Measurement of the roundness between circular and arc;
- Measurement of linearity;
- Measurement of axiality
- Measurement of symmetry
- Measurement of location
MIC-10BT tool microscope
MIC TECH’S new digital measurement microscope. Mainly used in manufacturing department, Measuring and testing room for components dimension test.LED illumination, calculator with two axises or three axises, full accessory for you to choose. Offer sub-micron precision test, excellent performance is best choice for your high quality components, integrated circuit three dimensional test. Even fresh man can operate this microscope very easily.
MIC-19JA5 Universal tool microscope graduator
19JA5 Universal tool microscope graduator
Use: Optical graduator is the same with 19JA, 19JC universal tool microscope, used for polar coordinates and angle measurements.
Measurement range and division:
- Measurement range 360°
- Projection value at reading 10”
- Diameter glass table 106mm
MIC-19JC Universal Tool Microscope
19JC Universal Tool Microscope
Classify type of measuring instrument universal tool microscope 19JC nearly contains all measures of testing geometry. With complete function, high precision, convenient operation and durability, this instrument is normal equipment in precise machinery field, effective testing gist for measure & examination dept., and right hand of science research and teaching field.
Adopting grating subdivision and digital technology, 19JC has the characters of direct reading and good consistency, which greatly improves work efficiency and further enlarge use range.
Digital-display device of this instrument has data output interface, which may be extended to contact with planar data gather and computer measure operating system to upgrade as 19JPC microcomputer-type all-purpose tool microscope.
Universal Tool Microscope (Digital display type) 19JC is projection of the 19JA million workers improved significantly, the use of sub-gratings and digital technology, intuitive readings and consistency with good characteristics such as increased efficiency, to further expand the scope of the use.
Instrument Digital Interface data output table can be extended to connect two-dimensional data acquisition system and computer measurement of the operating system to upgrade its computer-based universal tool microscope 19JPC.
MIC-19JPC micro computer universal tool microscope
19JPC micro computer universal tool microscope
19JPC micro-computer type all-purpose tool microcomputer is a new generation of all-purpose tool microcomputer used in computer assistant measure, which can solve each kind of complicated planar measuring problem. Traditional all-purpose tool microscope can not directly measure geometrical element in field of view, such as center of circle, midpoint, point of intersection, midline, and their distance, included angle and so on are hard to measure. But these are easy to do in 19JPC. This instrument adopts precise grating sensor, PC series and data interface gather to measure data, carry on data processing with 19JPC planar measuring program, display and print result. It is convenient to operate, only keying measuring command according to graphic menu displayed on screen. During the course of measuring, color display can timely display the coordination of collimated work piece. Rectangular coordinate or polar coordinate may convert at any movement, which is especially convenient for measuring polar coordinate and cam. This instrument adopts metric system and British system. Calculating precision may reach 0.0001mm and 0.00001inch.It may self-correct assemble error of worktable track, further improving measuring precision.
MIC-19JPC-V Universal Tool Microscope(Image)
19JPC-V Universal Tool Microscope(Image)
19LPC-V image-type all-purpose tool microscope is a new added image measuring system on the base of preserving all-purpose tool microscope performance. This system uses vision and special-purpose optical objective to substitute human’s eye to collimate and save video graph. Adopting electronic magnifier its zoom multiple is greatly improved and it is convenient to observe small work piece and precisely measure. Depending on high-precision track of all-purpose tool microscope, this system may realize high-precision image measuring in real meaning.
MIC-20A tool microscope
MIC TECH’S new digital measurement microscope. Mainly used in manufacturing department, Measuring and testing room for components dimension test.LED illumination, calculator with two axises or three axises, full accessory for you to choose. Offer sub-micron precision test, excellent performance is best choice for your high quality components, integrated circuit three dimensional test. Even fresh man can operate this microscope very easily.
MIC-20B tool microscope
MIC TECH’S new digital measurement microscope. Mainly used in manufacturing department, Measuring and testing room for components dimension test.LED illumination, calculator with two axises or three axises, full accessory for you to choose. Offer sub-micron precision test, excellent performance is best choice for your high quality components, integrated circuit three dimensional test. Even fresh man can operate this microscope very easily.
MIC-20BT tool microscope
MIC TECH’S MIC-20BT new digital measurement microscope. Mainly used in manufacturing department, Measuring and testing room for components dimension test.LED illumination, calculator with two axises or three axises, full accessory for you to choose. Offer sub-micron precision test, excellent performance is best choice for your high quality components, integrated circuit three dimensional test. Even fresh man can operate this microscope very easily.
MIC-20UF tool microscope
MIC TECH’S MIC-20UF new digital measurement microscope. Mainly used in manufacturing department, Measuring and testing room for components dimension test.LED illumination, calculator with two axises or three axises, full accessory for you to choose. Offer sub-micron precision test, excellent performance is best choice for your high quality components, integrated circuit three dimensional test. Even fresh man can operate this microscope very easily.
MIC-600 Multi-functional precision measuring microscope
MIC-600 Multi-functional precision measuring microscope is developed and aimed at the semiconductor industry,Silicon wafer manufacturing industry,electronic information industry,metallurgical industry.As an advanced precision measuring microscope,it can be used to identify,analyze and measure structure of a variety of metal,alloy and also for detecting the semiconductor,LCD,TFT,PDP and solar cell panel.
The ergonomics design makes you feel comfortable.
MIC-6A tool microscope
MIC TECH’S MIC-6A is new digital measurement microscope. Mainly used in manufacturing department, Measuring and testing room for components dimension test.LED illumination, calculator with two axises or three axises, full accessory for you to choose. Offer sub-micron precision test, excellent performance is best choice for your high quality components, integrated circuit three dimensional test. Even fresh man can operate this microscope very easily.
MIC-6B tool microscope
MIC TECH’S MIC-6B is new digital measurement microscope. Mainly used in manufacturing department, Measuring and testing room for components dimension test.LED illumination, calculator with two axises or three axises, full accessory for you to choose. Offer sub-micron precision test, excellent performance is best choice for your high quality components, integrated circuit three dimensional test. Even fresh man can operate this microscope very easily.
MIC-6UF tool microscope
MIC TECH’S MIC-6U/F is new digital measurement microscope. Mainly used in manufacturing department, Measuring and testing room for components dimension test.LED illumination, calculator with two axises or three axises, full accessory for you to choose. Offer sub-micron precision test, excellent performance is best choice for your high quality components, integrated circuit three dimensional test. Even fresh man can operate this microscope very easily.
MIC-DM tool microscope
MIC TECH’S MIC-DM is new digital measurement microscope. Mainly used in manufacturing department, Measuring and testing room for components dimension test.LED illumination, calculator with two axis or three axis, full accessory for you to choose. Offer sub-micron precision test, excellent performance is best choice for your high quality components, integrated circuit three dimensional test. Even fresh man can operate this microscope very easily.
Manual stage with high-resolution linear encoder makes fast and accurate measurement
zoom ratio 7:1 high quality lens
high resolution camera
share and clear image
transmitting, oblique illumination, and coaxial illumination
MIC-HL tool microscope
More accurate step measurement no Segment difference
sharp and excellent surface checking
Good illumination which can be applied to different working environment
Deep and large field of view
Color CCD camera
Digital image storage
MIC-JB precision measuring microscope
MIC-JB precision measuring microscope is a small size Two-dimensional measuring instrument with digital display,it is compact structure,imaging clearly and high precision.It adopts reflected and transmitted illumination,observe,analyze and measure the geometric sense of precision work piece through observation and digital display system.The microscope is wildly used in measuring room,produce line and department of research institutions,etc.Two-dimensional measuring software is available for your selection,for some geometric parameters which is difficult to measure directly,such as circle,arc,coaxial,parallel,crossing,relation of shape & position and virtual dimension,etc,it can get the result and output report automatically and quickly.
MIC-JD18 projecting universal length measuring machine
MIC-JD18 projecting universal length measuring machine
Characteristics:
- The wax-screen technique is adopted for the projection screen, clear in imaging and homogeneous in brightness of the field
- High quality cast iron through long-term aging treatment is adopted for the base frame, strong in rigidity and good in stability.
- The double and single wire reading system is adopted, precise in pointing and accurate in measurement
- The worktable can move, rotate and out-beat in every direction, convenient for the detection of parts in different forms
- This instrument equipped with multiple accessories of tailstock, measuring hooks and caps, etc, large range in measurement.
MIC-JD20 precision optimeter
MIC-JD20 0.2μm precision optimeter
Characteristics:
- New screen technology, attaching reading magnifier with uniform field brightness and clear image
- Hight measuring accuracy, stable and reliable data, convenient and fast measurement for precision parts with small dimension.
- Well structure design, small overall dimension, convenient for transportation
MIC-JD22A digital vertical length measuring machine
MIC-JD22A digital vertical length measuring machine
Characteristics:
- Advanced raster sensor is adopted and measuring data are displayed digitally
- Main measuring shaft is square in design, with satisfactory running linearity and stable performance
- The design accord with Abbe’s theorem, with higher measuring precision and without Abbe error
- Main shaft running can be measured automatically or manually, convenient for the measurement of batch workpieces with higher working efficiency
MIC-JD25C-25D data processing universal length measurer
MIC-JD25C-25D data processing universal length measurer
SPECIFICATION
Main Measure Work-pieces Include:
Smooth columniform worpieces (Axis, hole, plug gauge and ring gauge etc )
The mid-diameter of internal thread, external thread, thread plug gauge and thread ring gauge
Workpieces with parallel plane (calipers, length bar and low-grade measuring block)
MIC-JD2A horizontal projection optimeter
MIC-JD2A length measuring machine---horizontal projection optimeter
The length measuring machine is a kind of instruments used for measuring the distance between two end faces of a measured piece: its end faces include plane or curved ones and exterior or internal ones. The length measuring machine are divided into optical ones, linear measuring instruments and linear measuring machines
The length measuring machine is widely used in the measuring rooms of the enterprises in the engineering industry, tooling, measuring implement manufacturing industry and instrument and metering industry, etc. And also used in the professional measurement and appraisal department at various levels.
MIC-JD3 vertical projection optimeter
MIC-JD3 vertical projection optimeter
Characteristics:
- New screen technology, attaching reading magnifier with uniform field brightness and clear image
- Hight measuring accuracy, stable and reliable data, convenient and fast measurement for precision parts with small dimension.
- Well structure design, small overall dimension, convenient for transportation
- Dual purpose instrument, i.e. the projection optimeter glass tube can be taken off and installed on a machine tool to directly control finish size
MIC-JX11B Digital Multipurpose toolmaker’s microscope
MIC-JX11B Digital Multipurpose toolmaker’s microscope
Characteristics:
- The master microscope is equipped with multiple eyepieces and objectives, with large field view and sharp image.
- The photoelectric and digital technology is adopted, taking the precision grating scale as sensory element, with high accuracy of measurement.
- The master microscope can out-beat left and right, suitable for the measurement of helical parts.
- The transmission and indirect lighting can measure profile and the surface sizes
- High-speed movement and vernier arrangement are installed and can be switched over speedily.
- Multiple accessories of tailstock, V-type support, height-measuring device and etc, with wide use range.
MIC-JX13B computer multipurpose toolmaker’s microscope
MIC-JX13B computer multipurpose toolmaker’s microscope
Characteristics:
- The master microscope is equipped with multiple eyepieces and objectives, with large field view and sharp image.
- The photoelectric and digital technology is adopted, taking the precision grating scale as sensory element, with high accuracy of measurement.
- Advanced computer processing technology is adopted to input collected real-time signals in the grating and video data system into the computer, which were processed by the powerful 2-coordinate measuring software, this instrument can effectively fulfill all kinds of complicated measuring work.
- The master microscope can out-beat left and right, suitable for the measurement of helical parts.
- The transmission and indirect lighting can measure profile and the surface sizes
- High-speed movement and vernier arrangement are installed and can be switched over speedily.
- Multiple accessories of tailstock, V-type support, height-measuring device and etc, with wide use range.
MIC-JX13C universal computer multipurpose toolmaker’s microscope for image processing
MIC-JX13C universal computer multipurpose toolmaker’s microscope for image processing
Characteristics:
- The imported precision grating system is adopted as the sensory element; with numerous strong points of low heating power, corrosion resistance, pollution resistance, good vibration strength etc.
- The microscope, with powerful image processing software, can complete complicated measuring work, with its software data communicating with CAD to complete the surveying and mapping work.
- The semi-conducting laser as a sensor finder is used for speedily defining the measuring location, thus upgrading the efficiency of image locating.
- The software of digital imaging technology is adopted to automatically identify the outline boundary and to reduce human caused errors, thus upgrading the operational efficiency.
- With a digital display rotary table and a height-measuring device; all measured results of angles and heights can be digitally displayed, direct and convenient.
- The LED cold light source is adopted for the whole lighting device, with low heating power and long life.
- The master microscope can out-beat left and right, suitable for the measurement of helical parts.
