显示 1-12 个结果(共 66 个结果)

Show sidebar
Close

D-M1 inverted metallurgical microscope

Inverted metallurgical microscope. Widely used in researching microstructure of metal. Viewing, projection, photography in bright field or simple polarization. Can be used in research unit, metallurgical factory and colleges of industry for metallurgical testing, like metallographic and heat treatment, metal physics, process of steel making and casting.
Close

H-ZM1 upright metallurgical microscope

This equipment can be used in observation, analysis and research of Metallurgy, Mineral, Crystal, Micro-electronics and it is the first choice for the factories, universities, research institutions and electronic industry. It is adopted 2 kinds of illumination of reflection and transmission and also equipped with Epi-illumination Polarization devices. Under the reflected light, it can proceed Bright field and Polarizing observation. And it can also proceed Bright field observation under transmitted illumination. Stable, high-quality optical systems meet your requirement of high image quality, square-built body represents more rigid, T-shaped design gives you a more stable base. Humanized configuration design and convenient operation, Let you release form the pressure of heavy work. Let you devote experiment with entire energy.
Close

H-ZM2 upright metallurgical microscope

This equipment can be used in observation, analysis and research of Metallurgy, Mineral, Crystal, Micro-electronics and it is the first choice for the factories, universities, research institutions and electronic industry. It is adopted 2 kinds of illumination of reflection and transmission and also equipped with Epi-illumination Polarization devices. Under the reflected light, it can proceed Bright field and Polarizing observation. And it can also proceed Bright field observation under transmitted illumination. Stable, high-quality optical systems meet your requirement of high image quality, square-built body represents more rigid, T-shaped design gives you a more stable base. Humanized configuration design and convenient operation, Let you release form the pressure of heavy work. Let you devote experiment with entire energy.
Close

ICM-1000M tool microscope manual

Tool microscope for inspections ■ The stable and reliable operating mechanism provide clearer image and easier to operate. ■ Modulate microscope body with a new ergonomic design, structural symmetry, can used with many kinds of accessories. ■ Stage, light intensity and low position coarse and fine adjustment, increased comfort of operating. ■ Widely used in various types of semi-conductor silicon wafer inspection, materials science study, geology mineral analysis and precision engineering and other disciplines
Close

J-M1 inverted metallurgical microscope

This series microscope is widely used in observation & analysis of metallurgical organization in Mechanical industry, Research of Geological & Mineral department and viewing & measuring crystal, integrate circuit, micro-electronics, etc in Electronic industry. It is the first choice of Factories, Academy, Scientific research organization contrast image. Novel figure and superior craftsmanship keep abreast of the tidal current much more. Humanized configuration design and simple operation, Let you release from the pressure of heavy work.  
Close

J-M158 upright metallurgical microscope

J-M158 Metallurgical microscope is developed and aimed at the semiconductor industry, wafer manufacturing, electronic information industry, metallurgical industry, Used as an advanced Metallurgical microscope, the user can experience its super performance when using it. It can be widely used to identify and analyze Semiconductor, FPD, Circuit encapsulation, circuit substrate, Material, Casting/Metal/Ceramic parts, Precision moulds. This instrument adopts both reflecting and transmitted illumination, Bright&Dark field, DIC and Polarizing observation can proceed under reflecting illumination, and the Bright field observation is done under transmitted light. High quality and reliable optical system brings much clearer and sharper image. The design meets with the ergonomics needs and makes you feel comfortable and relaxed in doing your job. Characteristics and description
  1. Adopt UIS High-resolution, long working distance, and infinity light pathcorrecting system objective imaging technology
  2. Extending the multiplexing technology of objective, compatible infinityobjective with all the observation methods, including bright&dark fieldobservation, polarization and DIC also provide with high clear and sharp image in each observation method.
  3. Aspherical surface Kohler illumination, increasing the viewing brightness.
  4. WF10×(Φ25)Super wide viewing field Eyepiece, long working distancemetallurgical objective with bright and dark field
  5. The Nosepiece can be equipped with detachable DIC differential interferencedevice.
Close

J-M2 inverted metallurgical microscope

This series microscope is widely used in observation & analysis of metallurgical organization in Mechanical industry, Research of Geological & Mineral department and viewing & measuring crystal, integrate circuit, micro-electronics, etc in Electronic industry. It is the first choice of Factories, Academy, Scientific research organization contrast image. Novel figure and superior craftsmanship keep abreast of the tidal current much more. Humanized configuration design and simple operation, Let you release from the pressure of heavy work.  
Close

J-M4 upright metallurgical microscope

J-M4 Up-right Metallurgical Microscope is applicable to the observation of transparent and opaque objects. It is equipped with Epi-illumination, transmission illumination system, plan achromatic objectives with sharp & clear image and good contrast. In the meanwhile, it is equipped with polarizing device, it’s an ideal instrument for research such as Metallographic, Precision Engineering and Electronics, suitable for School, Scientific research department and factories as well.
Close

J-M6J upright metallurgical microscope

Model J-M6J series Up-right Metallurgical Microscope used in observation & analysis of metallurgy, Mineralogy, crystal and micro-electronics, etc. It is the first choice of Factories, Universities, Scientific research organization and Electronic industrial department. It adopts 2 kinds of illumination, reflection and transmission and epi-polarizing fitting is also outfitted. You can proceed not only Bright field and Polarizing viewing under illumination of reflection light, but also making bright field viewing under transmission light. Stable and superior optical system meet your high quality image requirement. “T” type figure design provides the stable base, humanized configuration design, simple and convenient operating system make your work easy and relax.
Close

J-M6JB upright metallurgical microscope

This equipment can be used in observation, analysis and research of Metallurgy, Mineral, Crystal, Micro-electronics and it is the first choice for the factories, universities, research institutions and electronic industry. It is adopted 2 kinds of illumination of reflection and transmission and also equipped with Epi-illumination Polarization devices. Under the reflected light, it can proceed Bright field and Polarizing observation. And it can also proceed Bright field observation under transmitted illumination. Stable, high-quality optical systems meet your requirement of high image quality, square-built body represents more rigid, T-shaped design gives you a more stable base. Humanized configuration design and convenient operation, Let you release form the pressure of heavy work. Let you devote experiment with entire energy.
Close

J-ZDM upright metallurgical microscope

  1. Adopt UIS High-resolution, Long working distance, and infinity light path correcting system objective imaging technology
  2. Extending the multiplexing technology of objective, compatible infinity objective with all the observation methods. including bright & dark field observation, polarization and also provide with high clear and sharp image in each observation method.
  3. Aspherical surface Kohler illumination, increasing the viewing brightness.
  4. WF10 X(Φ25)super wide field Eyepiece, long working distance metallurgical objective with bright and dark field
  5. The Nosepiece can be equipped with detachable DIC differential interference  device.
Close

J-ZM1 upright metallurgical microscope

J-ZM1 Industrial Metallurgical microscope is developed and aimed at the semiconductor industry, wafer manufacturing, electronic information industry, metallurgical industry. Used as an advanced Metallurgical microscope, the user can experience its super performance when using it. It can be widely used to identify and analyze Semiconductor, FPD, Circuit encapsulation, circuit substrate, Material, Casting/Metal/Ceramic parts, Precision moulds and observe thicker specimen. High quality and reliable optical system brings much clearer and contrast image. The design meets with the ergonomics needs and makes you feel comfortable and relaxed in doing your job.