Fast delivery
Sea&Air
QG-2 Lithofacies Sample Cutting Machine
Cutting is the first important procedure in the process of the sample preparation. This machine is suitable for the general lithofacies materials. The shell, axle sleeve, jaw, work table and other main parts are all made of stainless steel, which can endure long time. It adopts quick clamp for manual feeding which is very convenient to operate. With circulating cooling water tank, the surface of the sample after cutting is bright and flat without burns, thus it is the ideal equipment for cutting lithofacies samples.
QG-3 cutting machine
This machine is suitable for general metallographic and lithofacies materials. By pulling the spindle and using the spindle gravity to cut the sample, the speed is high and the cutting ability is strong. It adopts the double-sided clamp structure, which can fix the sample firmly. The main parts of the clamp and cutting table are all made of stainless steel, which has long service life and convenient maintenance. The cutting chamber adopts closed structure with safety limit switch, while there is an opening in the left of the cover which can cut long strip samples, and it has the transparent plexiglass window and built-in LED lamp for observation when cutting. With circulating cooling water tank, the surface of the sample after cutting is bright and flat without burns, thus it is the ideal equipment for sample cutting. This model is divided into benchtop and floor type for customers to choose.
QG-3A Metallographic Sample Cutting Machine
QG-3A Metallographic Sample Cutting Machine
The spindle shaft of the abrasive wheel is fitted on the rocker arm bearing block, it is driven by the V-belt. Loose or tight of the V-belt can be adjusted by deflecting the tensioner. Swinging motion of the swinging arm will convert to the feed motion of the abrasive wheel whether the cutting feed quick or slow will depend on the swinging arm. Above the working table is the specimen quick clamping device. Pressure bar can move up and down. Clamp and use easily and intelligently. There are cooling liquid passing in the pressure bar. Under the pressure bar there is the working clamp port.
QG-4 Metallographic Sample Cutting Machine
QG-4 Multifunctional Cutting Machine
QG-4 multifunctional cutting machine is mainly used for cutting cylinder and samples of anomalistic shape, such as multi-angular shape, protruding board, etc. It adopts the all-sealing structure, which can guarantee the cutting sample under the conditions of absolute safety. In order to avoid the sample burning the material texture because of over-heating in cutting, besides the cutter matching strong cooling system, the sample can revolve in the cutting, which can avoid the sample's surface being burned in the cutting, and can increase the cutting cross section, raising the availability of cutting emery wheel. The cutter has the advantages of easy to operate, use, maintain, etc, which is an excellent equipment of cutting anomalistic shapes.
QG-4A Metallographic Sample Cutting Machine
This machine is suitable for various metallographic materials. The cutting thickness of the material can be adjusted by the lateral movement of the cutting table, and then the sample can be cut by the longitudinal movement of the spindle, which has strong cutting ability and convenient operation. The main parts of the clamp and cutting table are all made of stainless steel, which has long service life and convenient maintenance. The cutting chamber adopts closed structure with safety limit switch, and it has the transparent plexiglass window and built-in LED lamp for observation when cutting. With cabinet structure, it is easy to store all kinds of cutting consumables. With circulating cooling water tank, the surface of the sample after cutting is bright and flat without burns, thus it is the ideal equipment for sample cutting.
QG-5 Metallographic Sample Cutting Machine
This machine is suitable for various metallographic materials. The sample can be cut by the longitudinal movement of the table, which has large cutting range and strong cutting ability. It adopts the double-sided clamp structure, which can fix the sample firmly. The main parts of the clamp and cutting table are all made of stainless steel and with built-in flushing water gun, it has long service life and convenient maintenance. The cutting chamber adopts two sides’ transparent plexiglass window, built-in LED lamp and powerful exhaaust fan, which makes observation more clear. With cabinet structure, it is easy to store all kinds of cutting consumables. With circulating cooling water tank, the surface of the sample after cutting is bright and flat without burns, thus it is the ideal equipment for sample cutting.
QG-5A Metallographic Sample Cutting Machine
This machine is suitable for various metallographic materials. The sample can be cut by the longitudinal movement of the table, which has large cutting range and strong cutting ability. It adopts the double-sided clamp structure, which can fix the sample firmly. The main parts of the clamp and cutting table are all made of stainless steel and with built-in flushing water gun, it has long service life and convenient maintenance. The cutting chamber adopts two sides’ transparent plexiglass window, built-in LED lamp and powerful exhaust fan, which makes observation more clear. With cabinet structure, it is easy to store all kinds of cutting consumables. With circulating cooling water tank, the surface of the sample after cutting is bright and flat without burns, thus it is the ideal equipment for sample cutting.
QG-90Z Metallographic Sample Cutting Machine
QG-90Z Metallographic Sample Cutting Machine
Brief Introduction:
QG-90Z metallographic sample cutting machine is a precision cutting machine integrating automatic mode and manual mode. With the optional X axis worktable, it has automatic and continuous cutting function along the Y axis. With the function of adjusting the height of chief axis, it is used in a variety of shapes, sizes and materials sample cutting. The cutting capacity can meet the daily production inspection and laboratory detection for cutting samples.
QG-PCB30 automatic precision cutting machine
QG-PCB30 automatic precision cutting machine adopts the speed regulation motor which drives the belt to control the cut-off wheel to achieve the effective speed. With the touch screen control, the display is clear and the function layout is reasonable. The feed of cutting can be controlled by cut-off wheel propulsion or by cutting table propulsion according to the different materials or personal habits, and also it can automatically finish cutting according to the set parameter. With built-in independent stainless steel circulating filter cooling water tank, combined with 80% water and 20% cutting fluid, it can effectively avoid the sample surface heat and prevent rail and ball screw rust. The machine has safety protection function for opening the cover. The working area is totally enclosed and has a transparent cover for observation during cutting. The cutting table can be equipped with different clamping tools which can be freely disassembled and cleaned. This benchtop cutting machine can be applied to the cutting of PCB plate, metal materials within Φ30mm, electronic parts and mounting samples, etc. The appearance is beautiful and the interface is easy to operate, which is the best choice of the small piece cutting.
QGZ-100120200300 Automatic Cutting Machine
This machine is a PLC controlled metallographic sample cutting machine, and it can also be controlled by electronic handwheel. The structure of the machine is firm and reasonable. The frequency conversion motor is directly connected with the cut-off wheel, which provides power transmission between the motor and the cut-off wheel and ensures the cutting efficiency. Also it adopts electromechanical separation structure to effectively protect electrical safety, which has convenient maintenance and long service life. Using Schneider electric and Mitsubishi software, X, Y, Z axis can be automatically and accurately controlled, it can adjust the amount of feed according to the hardness of material to achieve the fastest cutting effect. The cutting speed is controlled by frequency conversion, which has very high reliability and control ability.
QGZ-65 Automatic Metallographic Sample Cutting Machine
QGZ-65 Automatic Metallographic Sample Cutting Machine
This machine is a manual / automatic precision cutting machine. The whole machine adopts electromechanical separation structure, which is effective in protecting electrical safety and convenient in maintenance. The height of the spindle can be adjusted, Y axis can be automatically and accurately controlled, and the cutting table can automatically return after cutting. With automatic intelligent feeding, the speed can be automatically adjusted according to the hardness of the material to avoid blockage. This machine is suitable for the sample cutting of various shapes, sizes and materials, the surface of the sample after cutting is bright and flat without burns, thus it is the ideal equipment for sample cutting.
QGZ-90 Automatic Metallographic Sample Cutting Machine
QGZ-90 Automatic Metallographic Sample Cutting Machine
This machine is a manual / automatic precision cutting machine. The whole machine adopts electromechanical separation structure, which is effective in protecting electrical safety and convenient in maintenance. The height of the spindle can be adjusted, Y axis and X axis can be both automatically and accurately controlled to achieve the continuous thin slice cutting of the sample. With automatic intelligent feeding, the speed can be automatically adjusted according to the hardness of the material to avoid blockage. This machine is suitable for the sample cutting of various shapes, sizes and materials, the surface of the sample after cutting is bright and flat without burns, thus it is the ideal equipment for sample cutting.
